Motorola Codeplug wanted

[radiogaga]

Hi all

Does anyone have a Motorola DP4400 UHF codeplug then could send me please?

Doesn't matter what is in it, can be blank, just need it to recover my 4400 which I've forgotten the codeplug password for and can't find the previous read.

Samples in the CPS are for a VHF radio not UHF unfortunately.

Cheers

[moj]

which cps do you need it working on , i've got 12.1 codeplug here m8 if that's any use ?

[radiogaga]

Thanks.. should be fine, using 12.5...

Can you upload to a dropbox or similar please?

Ta

[moj]

https://www.dropbox.com/sh/j4snmlm1zkuj ... Mu4Wa?dl=0

there you go mate

[radiogaga]

Top Man

Thanks

[moj]

no problem , let me know if it works ..

[radiogaga]

It does Thanks

[radiosification]

I know I'm a bit late, but for future reference or for anyone else reading this thread you can usually find a folder with default codeplugs for most radios already on your computer. It gets put there when you install the MotoTRBO CPS.

[radiogaga]

It does but the DP4400 is for the VHF radio not UHF.

[radiosification]

It does but the DP4400 is for the VHF radio not UHF.

Ah sorry, my mistake, I just saw that you did mention the samples in your first post. However it was only a brief mention so hopefully my post will help someone in the future searching the forum for a sample codeplug

[macuser]

Hallo und good evening, i need a codeplu for my DP4400 UHF. I have the same problem with the password and the same VHF codeplug in the cps.
Can anybody help me?
(sorry for my very bad english...)

[Squirrely]

https://www.dropbox.com/sh/j4snmlm1zkuj ... Mu4Wa?dl=0

there you go mate

Hey, any chance you could re-upload that codeplug? i also require a copy, thanks!

[kevinbleicester]

Hi, silly question is a blankcodeplug still avaailable for the DP4400 I have got a radio from ebay and it is locked codeplaug. As far as I can tell if i uploead a new codeplug it will overright the old one with no password. Is that correct? do OI need to put the radio into a special mode to do this? Thanks in advance.

[scottyboy]

Any codeplug from the same model will do. Just choose clone radio and it will overwrite the codeplug.