Page 1 of 1
President 3900
Posted: 20 Mar 2018, 15:17
by cb4ever104
At least I presume that's what it is . I don't see it listed on the roger free site .
http://78roger.free.fr/president.htm
It definitely has that Taiwan "tint" about it , so I'm thinking early 90s , and probably just another 6 band EPT360013B clone ?
President 3900.JPG
Don't see them that often to be honest , and I've never had one .
Sammy
Re: President 3900
Posted: 20 Mar 2018, 16:22
by andrew013
with a ch 19 switch is that not just a silver richard
Re: President 3900
Posted: 20 Mar 2018, 17:23
by cb4ever104
Didn't the silver Richard have a sticker as the President name ? I'll need to go and look.
Re: President 3900
Posted: 20 Mar 2018, 18:11
by Mudslinger
Looks like a Ranger President Richard.
Quite a rare beast.
Re: President 3900
Posted: 20 Mar 2018, 18:34
by cb4ever104
My mistake then. The guy listed it as a 3900. The back of it should have a Richard plate on it. Shouldn't it ?
Re: President 3900
Posted: 20 Mar 2018, 18:40
by Mudslinger
Not sure, the last Silver president Ronald I owned had no plate on it either.
Re: President 3900
Posted: 20 Mar 2018, 18:51
by cb4ever104
I'm looking for that thread with the picture of all the Richards from a few years back . Had them one on top of the other . I thought the silver Richard was the 360FM that had the sticker over the 360FM ? There must have been 2 then ? I've only ever had the black one . Is this one 6 bands then ?
Re: President 3900
Posted: 20 Mar 2018, 18:56
by cb4ever104
Ahh . Found it !
viewtopic.php?f=29&t=47106&hilit=presid ... rd#p419769
Think dementia must be setting in as my cb knowledge is going out the window . First the 3600 , and now the Richard ...... Taxi !!!
Re: President 3900
Posted: 21 Mar 2018, 17:52
by 14CS06
cb4ever104 wrote: ↑20 Mar 2018, 15:17
At least I presume that's what it is . I don't see it listed on the roger free site .
http://78roger.free.fr/president.htm
It definitely has that Taiwan "tint" about it , so I'm thinking early 90s , and probably just another 6 band EPT360013B clone ?
President 3900.JPG
Don't see them that often to be honest , and I've never had one .
Sammy
Hello
I'm posting pictures of a friend's President
PRESIDENT RICHARD silver
Platine : EPT360011Z
Homologation : 87009 CB
@+
Claude
Re: President 3900
Posted: 21 Mar 2018, 20:45
by Mudslinger
Was that Tim (Otter's) radio?
I seem to remember seeing it on ebay France and you helped him buy it as the seller wouldn't send to the UK.
Re: President 3900
Posted: 21 Mar 2018, 21:09
by 14CS06
Hello
Yes that's right . I took pictures for my collection before the expedition
@+
Claude
Re: President 3900
Posted: 21 Mar 2018, 22:00
by Mudslinger
That was a good result.
Re: President 3900
Posted: 22 Mar 2018, 02:26
by astradyne
It appears that in the picture Sammy posted initially some of the control's on the radio aren't original (inner dual pot controls). They look to be from a later 3900.
Re: President 3900
Posted: 22 Mar 2018, 10:06
by cb4ever104
astradyne wrote: ↑22 Mar 2018, 02:26
It appears that in the picture Sammy posted initially some of the control's on the radio aren't original (inner dual pot controls). They look to be from a later 3900.
Well spotted Andy
To be honest I haven't seen the back of it , so it might not even be a Richard .