So by adding a few radials, on the ground plane side of the plug, 2 inches above the massive sheet metal ground plane, it's supposed to do what?
The only thin this has done is lengthen the radiating element by a inch below the coil.
Groundplane Radials Kit's for mobile aerials
- Yeti
- Veteran
- Posts: 4785
- Joined: 14 Nov 2007, 00:31
Re: Groundplane Radials Kit's for mobile aerials
Will the next movie in the series be The Fast and The Funeral?
- Mudslinger
- Legend
- Posts: 7490
- Joined: 28 Jul 2010, 07:11
- Location: Oxfordshire
Re: Groundplane Radials Kit's for mobile aerials
About as much use as SWR grease.
Mudslinger - Simon
26TM274
26CT612
There is no such thing as a Fidelity 1000 which is too good to scrap.
26TM274
26CT612
There is no such thing as a Fidelity 1000 which is too good to scrap.
- Ashtec
- Legend
- Posts: 9156
- Joined: 30 Dec 2009, 23:12
- Call Sign: M6LTD
- Location: Uk
Re: Groundplane Radials Kit's for mobile aerials
Are well it look's good if note else still my work better on the land rover
- Mudslinger
- Legend
- Posts: 7490
- Joined: 28 Jul 2010, 07:11
- Location: Oxfordshire
Re: Groundplane Radials Kit's for mobile aerials
Somewhere for the birds to perch if nothing else.
Mudslinger - Simon
26TM274
26CT612
There is no such thing as a Fidelity 1000 which is too good to scrap.
26TM274
26CT612
There is no such thing as a Fidelity 1000 which is too good to scrap.
- Ashtec
- Legend
- Posts: 9156
- Joined: 30 Dec 2009, 23:12
- Call Sign: M6LTD
- Location: Uk
- 21kpi015
- New User
- Posts: 4
- Joined: 12 Mar 2017, 15:33
- Call Sign: 21KPI015
Re: Groundplane Radials Kit's for mobile aerials
Where have u buy this radialkit
21 KPI 015
Sweden Coordinator
Sweden Coordinator
-
- Legend
- Posts: 8666
- Joined: 23 Jan 2010, 19:26
- Location: Bristol-ish
Re: Groundplane Radials Kit's for mobile aerials
Noooooo..... don't do it!