help with a multimode 2
- listner132
- Radio Addict
- Posts: 618
- Joined: 28 Mar 2009, 11:27
- Location: Ayrshire Scotland.
help with a multimode 2
Hi guys i have said radio that is mid hi double hi but i would love to get the channel read out to say 12 instead of the 52 when on the hi band..i have done this mod years ago but simply cant remember what i did..i know its only 1 wire i nedd to unsolder from the top of the channelselector board and solder it to another point on the board but like i say dont remember where thanks guys for any help.
- JollyRoger
- Super Member
- Posts: 297
- Joined: 27 Apr 2011, 16:31
- Location: In The Shack
Re: help with a multimode 2
Take the wire off were the red arrow is and reconnect it to were the yellow arrow is, there is already a wire were the yellow arrow is, leave it connected. see photo
Regards JR
"Those who say it cannot be done shouldn't interrupt the people doing it"
"Those who say it cannot be done shouldn't interrupt the people doing it"
- listner132
- Radio Addict
- Posts: 618
- Joined: 28 Mar 2009, 11:27
- Location: Ayrshire Scotland.
Re: help with a multimode 2
Thanks very much for the image J.R. Top bloke.
- JollyRoger
- Super Member
- Posts: 297
- Joined: 27 Apr 2011, 16:31
- Location: In The Shack
Re: help with a multimode 2
Regards JR
"Those who say it cannot be done shouldn't interrupt the people doing it"
"Those who say it cannot be done shouldn't interrupt the people doing it"