Any ideas please i have a rci 2995 dx with a very lazy needle ??
THANKS IN ADVANCE
RCI2995 dx
- porky.69
- Legend
- Posts: 5991
- Joined: 18 May 2008, 17:20
- Location: Shropshire. England.
RCI2995 dx
This is my Territory.....Be on your way
- ch25
- Top Poster
- Posts: 1671
- Joined: 03 Dec 2016, 11:07
- Call Sign: Lemmy
- Location: Poland
Re: RCI2995 dx
Put some grease on it.
[Joke mode off] Take a signal generator and set s-meter according to specs.
Chris
[Joke mode off] Take a signal generator and set s-meter according to specs.
Chris
WE ARE MOTÖRHEAD, AND WE PLAY ROCK N' ROLL
You can't have too many antennas...
You can't have too many antennas...
-
- Top Poster
- Posts: 1933
- Joined: 13 Mar 2013, 22:23
Re: RCI2995 dx
Have you tried turning the right VR to adjust the meter,slacking off small screw on meter slightly ?
Google coppertalk 2995dx signal meter,common problem for these radios,hope this helps.
Google coppertalk 2995dx signal meter,common problem for these radios,hope this helps.
Plenty are talking worldwide on 27.555 usb,
Some are too far up their own @rse to admit it,
Many happen to know otherwise dx-ing test free,
Showing a complete lack of respect for the law.
27.555 Usb
Some are too far up their own @rse to admit it,
Many happen to know otherwise dx-ing test free,
Showing a complete lack of respect for the law.
27.555 Usb
- ch25
- Top Poster
- Posts: 1671
- Joined: 03 Dec 2016, 11:07
- Call Sign: Lemmy
- Location: Poland
Re: RCI2995 dx
Solution is really simple. Replace D14 with any germanium diode. Recalibrate s-meter. Gonna improve a lot.
Chris
Chris
WE ARE MOTÖRHEAD, AND WE PLAY ROCK N' ROLL
You can't have too many antennas...
You can't have too many antennas...
- porky.69
- Legend
- Posts: 5991
- Joined: 18 May 2008, 17:20
- Location: Shropshire. England.