DX135/CRE8900 Encoder

A forum for the discussion of matters of a technical nature. All such activities are undertaken at the readers discretion and own risk. If you don't know what you are doing, don't blame us if it all goes wrong!
Post Reply
User avatar
radiogaga
Top Poster
Top Poster
Posts: 1472
Joined: 04 Sep 2010, 20:37
Call Sign: 26TM399

DX135/CRE8900 Encoder

Post by radiogaga » 25 Aug 2018, 11:01

Other than paying 19€ to get this tiny piece delivered from Germany, any ideas where I can get hold of a DX135/CRE8900 encoder?

https://www.on-radio-shop.de/shop/Zubeh ... ::306.html


Cheers
Sam :thumbup:
26TM399 Hampshire and Isle of Wight
30TM399 Northern Costa Blanca

User avatar
ch25
Super Member
Super Member
Posts: 448
Joined: 03 Dec 2016, 11:07
Call Sign: n0call
Location: Poland

Re: DX135/CRE8900 Encoder

Post by ch25 » 25 Aug 2018, 12:18

You can't have too many antennas...

User avatar
Black Spirit
Veteran
Veteran
Posts: 4000
Joined: 16 Mar 2009, 19:30
Location: S.Wales

Re: DX135/CRE8900 Encoder

Post by Black Spirit » 25 Aug 2018, 12:57

Is the original splined or D shaft ? Pretty much any encoder will work, If the pinout is different to the original just run wires from the encoder to the PCB

EXAMPLE: https://www.ebay.co.uk/itm/Rotary-Encod ... SwPhdVM6Wa

User avatar
radiogaga
Top Poster
Top Poster
Posts: 1472
Joined: 04 Sep 2010, 20:37
Call Sign: 26TM399

Re: DX135/CRE8900 Encoder

Post by radiogaga » 25 Aug 2018, 13:30

Cheers

It's spindle. Sorry that's the correct link but I guess the image they have used is for illustration only.

One of those darn slotted nuts on the encoder, which ordinarily is not issue but this one is so far recessed normal tricks won't do. What tips for this bad boy?
IMG_0445.jpg
You do not have the required permissions to view the files attached to this post.
26TM399 Hampshire and Isle of Wight
30TM399 Northern Costa Blanca

User avatar
kilimax
Veteran
Veteran
Posts: 2697
Joined: 05 May 2014, 09:18
Call Sign: GM0BRJ
Location: Same Country as Buick Mackane

Re: DX135/CRE8900 Encoder

Post by kilimax » 25 Aug 2018, 15:15

Kilimax - Drew
Amateur Callsign GM0BRJ
Tango Mike Callsign 108TM144

I've changed radios that many times, I've forgotten what I have :think:

User avatar
radiogaga
Top Poster
Top Poster
Posts: 1472
Joined: 04 Sep 2010, 20:37
Call Sign: 26TM399

Re: DX135/CRE8900 Encoder

Post by radiogaga » 27 Aug 2018, 20:16

:thumbup: Thanks... Ordered.
26TM399 Hampshire and Isle of Wight
30TM399 Northern Costa Blanca

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests