wire of my alan 87i
- listner132
- Radio Addict
- Posts: 618
- Joined: 28 Mar 2009, 11:27
- Location: Ayrshire Scotland.
wire of my alan 87i
Here i have posted a link to a small problem i have..in the pic i have the same problem with my radio one end of the white/grey wire is not connected to anywere please can anyone help as to were it might go ?
http://obrazki.elektroda.pl/2109212700_1360497571.jpg
http://obrazki.elektroda.pl/2109212700_1360497571.jpg
- beamer320i
- Radio Addict
- Posts: 746
- Joined: 11 Jun 2013, 20:14
- Location: Tamworth, Staffordshire
Re: wire of my alan 87i
What's the problem with the radio?
- listner132
- Radio Addict
- Posts: 618
- Joined: 28 Mar 2009, 11:27
- Location: Ayrshire Scotland.
Re: wire of my alan 87i
Dont think there is one... i would just like to know were this wire should be connected as it seem odd that it is off.
- cb4ever104
- Legend
- Posts: 6561
- Joined: 28 Jul 2011, 21:26
- Location: España
Re: wire of my alan 87i
Does the SWR meter work ? I remember working on a swr related fault on a 3900 and there's a track that runs all the way from the back of the radio to the JXXX connector at the front . Might be for that . I'm sure Claude will have a picture kicking about somewhere .
Sammy
Sammy
30TM060
Paul aka "Sammy". (108) PY60 Old Paisley DX Group (RIP Rab Markie)
Ex GM0 , now EA5 .
Handle "Fortune Hunter" back in "the day"
Radios ....? Anything that says "TAIWAN R.O.C" on the back.
Paul aka "Sammy". (108) PY60 Old Paisley DX Group (RIP Rab Markie)
Ex GM0 , now EA5 .
Handle "Fortune Hunter" back in "the day"
Radios ....? Anything that says "TAIWAN R.O.C" on the back.
- listner132
- Radio Addict
- Posts: 618
- Joined: 28 Mar 2009, 11:27
- Location: Ayrshire Scotland.
Re: wire of my alan 87i
yes mate the swr meter is working fine.
thanks hope someone has a pic.
thanks hope someone has a pic.
- 14CS06
- Top Poster
- Posts: 1796
- Joined: 04 Mar 2012, 09:15
- Location: JN33LN - ALPES-MARITIMES-06 France
Re: wire of my alan 87i
Last edited by 14CS06 on 13 Apr 2018, 18:50, edited 1 time in total.
Photo Collector CB RADIO
- listner132
- Radio Addict
- Posts: 618
- Joined: 28 Mar 2009, 11:27
- Location: Ayrshire Scotland.
Re: wire of my alan 87i
thanks very very much for taking the time to post up these pics..it looks like it is not connected to anything on the last pic you shared..maybe it is suppose to be off...seems odd tho.
- 14CS06
- Top Poster
- Posts: 1796
- Joined: 04 Mar 2012, 09:15
- Location: JN33LN - ALPES-MARITIMES-06 France
Re: wire of my alan 87i
Last edited by 14CS06 on 13 Apr 2018, 18:51, edited 1 time in total.
Photo Collector CB RADIO
- listner132
- Radio Addict
- Posts: 618
- Joined: 28 Mar 2009, 11:27
- Location: Ayrshire Scotland.
Re: wire of my alan 87i
thanks Claude but please can you tell me if the black wire is soldered to the board ?
- 14CS06
- Top Poster
- Posts: 1796
- Joined: 04 Mar 2012, 09:15
- Location: JN33LN - ALPES-MARITIMES-06 France
Re: wire of my alan 87i
Hellolistner132 wrote:thanks Claude but please can you tell me if the black wire is soldered to the board ?
The black wire is not soldered to the board on this pic
@+
Claude
Last edited by 14CS06 on 13 Apr 2018, 18:51, edited 1 time in total.
Photo Collector CB RADIO
- ch25
- Top Poster
- Posts: 1675
- Joined: 03 Dec 2016, 11:07
- Call Sign: Lemmy
- Location: Poland
Re: wire of my alan 87i
That white wire suppose to work as power adjust on SSB, but it ruins SSB signal. First thing is to remove that when you open radio.
Chris
Chris
WE ARE MOTÖRHEAD, AND WE PLAY ROCK N' ROLL
You can't have too many antennas...
You can't have too many antennas...
- cb4ever104
- Legend
- Posts: 6561
- Joined: 28 Jul 2011, 21:26
- Location: España
Re: wire of my alan 87i
Don't think I've ever seen adjustable SSB power on an EPT36001XX board ? Only AM/FM .ch25 wrote:That white wire suppose to work as power adjust on SSB, but it ruins SSB signal. First thing is to remove that when you open radio.
Chris
Sammy
30TM060
Paul aka "Sammy". (108) PY60 Old Paisley DX Group (RIP Rab Markie)
Ex GM0 , now EA5 .
Handle "Fortune Hunter" back in "the day"
Radios ....? Anything that says "TAIWAN R.O.C" on the back.
Paul aka "Sammy". (108) PY60 Old Paisley DX Group (RIP Rab Markie)
Ex GM0 , now EA5 .
Handle "Fortune Hunter" back in "the day"
Radios ....? Anything that says "TAIWAN R.O.C" on the back.
- ch25
- Top Poster
- Posts: 1675
- Joined: 03 Dec 2016, 11:07
- Call Sign: Lemmy
- Location: Poland
Re: wire of my alan 87i
That wire does that. Since ages
WE ARE MOTÖRHEAD, AND WE PLAY ROCK N' ROLL
You can't have too many antennas...
You can't have too many antennas...
- cb4ever104
- Legend
- Posts: 6561
- Joined: 28 Jul 2011, 21:26
- Location: España
Re: wire of my alan 87i
I'm not home , so I can't check any of my 14B boards , but I've never seen it before . So the radios that have the cable have variable SSB power , but no variable AM/FM power ? Very weird .
30TM060
Paul aka "Sammy". (108) PY60 Old Paisley DX Group (RIP Rab Markie)
Ex GM0 , now EA5 .
Handle "Fortune Hunter" back in "the day"
Radios ....? Anything that says "TAIWAN R.O.C" on the back.
Paul aka "Sammy". (108) PY60 Old Paisley DX Group (RIP Rab Markie)
Ex GM0 , now EA5 .
Handle "Fortune Hunter" back in "the day"
Radios ....? Anything that says "TAIWAN R.O.C" on the back.
-
- New User
- Posts: 3
- Joined: 27 Mar 2019, 20:29
- Call Sign: 30LOM50