+10kc jump for stalker9

A forum for the discussion of matters of a technical nature. All such activities are undertaken at the readers discretion and own risk. If you don't know what you are doing, don't blame us if it all goes wrong!
User avatar
cb4ever104
Veteran
Veteran
Posts: 4533
Joined: 28 Jul 2011, 21:26
Location: Alicante , España

Re: +10kc jump for stalker9

Post by cb4ever104 » 21 Mar 2018, 11:41

dt307 wrote:
21 Mar 2018, 10:59
thanks sammy nice to see you m8
Hi Chris ! Good to see you too m8 !

After 21 years in Spain I now find myself stuck back here in the UK :crazy: Haven't been able to do any radio work so my brain's getting rusty :)
30TM060
Paul aka "Sammy". (108) PY60 Old Paisley DX Group (RIP Rab Markie)
Ex GM0 , now EA5 .
Handle "Fortune Hunter" back in "the day"
Radios ....? Anything that says "TAIWAN R.O.C" on the back.

Raverrst
Regular
Regular
Posts: 9
Joined: 18 Mar 2018, 18:15
Call Sign: LiveWire
Location: Devon

Re: +10kc jump for stalker9

Post by Raverrst » 21 Mar 2018, 11:45

Does it matter where the resistor goes within the length of wire in both cases? or can it go anywhere i,e in the middle of the 8v wire

Thanks

User avatar
astradyne
Moderator
Moderator
Posts: 7470
Joined: 14 Jun 2010, 09:28
Location: Dunny On The Wolds
Contact:

Re: +10kc jump for stalker9

Post by astradyne » 21 Mar 2018, 12:24

Raverrst wrote:
21 Mar 2018, 11:45
Does it matter where the resistor goes within the length of wire in both cases? or can it go anywhere i,e in the middle of the 8v wire

Thanks
I've always solderd the resistor directly onto the pin on the IC and run a wire from the other side of the resistor directly to the switch.
Never, ever, ever....bloody anything ever!

Far too many radio's to list here. But I do own a legal one...

User avatar
cb4ever104
Veteran
Veteran
Posts: 4533
Joined: 28 Jul 2011, 21:26
Location: Alicante , España

Re: +10kc jump for stalker9

Post by cb4ever104 » 21 Mar 2018, 12:41

I usually solder half the wire to pin 9 . Then add the resistor in the middle (with heat shrink) and then more wire to the middle terminal of the switch . The other ends of the switch will be 8V and earth . That way the resistor will always be in series regardless of what the switch position is .

Sammy
30TM060
Paul aka "Sammy". (108) PY60 Old Paisley DX Group (RIP Rab Markie)
Ex GM0 , now EA5 .
Handle "Fortune Hunter" back in "the day"
Radios ....? Anything that says "TAIWAN R.O.C" on the back.

User avatar
NightProwler
Veteran
Veteran
Posts: 2679
Joined: 08 Feb 2012, 22:31
Call Sign: 163TM186
Location: South Wales

Re: +10kc jump for stalker9

Post by NightProwler » 21 Mar 2018, 16:25

Nice :thumbup:
Shorter of breath and one day closer to death

User avatar
MrWeetabix
Admin
Admin
Posts: 14252
Joined: 26 Aug 2008, 13:34
Call Sign: 26TM175
Location: Tynemouth

Re: +10kc jump for stalker9

Post by MrWeetabix » 21 Mar 2018, 16:48

dt307 wrote:
21 Mar 2018, 11:07
CAN A MOD EDIT THIS PLEASE AS I CANT!

solder a red wire WITH A 1K RESISTOR IN SERIES to constant +8v on front of pcb right by the swith or (pin 16 of either of the 4008 adders will do ic5/6 (9dx) ic301/302(fdx))

THANKS

Done, let me know if I've messed it up at all. :thumbup:
26TM175. OP: Craig. QTH: Tynemouth. Also 163TM175 when mobile in Wales 8)

PO Box: 62 Town: Albrighton City: Wolverhampton Zip: WV7 3WR

TM1 is now on Facebook http://tinyurl.com/TM1onFB || New Tango Mike QSL cards https://tinyurl.com/TM1-NewQSL

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests