Sorry I know it's another ft100d question.
I had a go at the tx mod on it, the problem I have got is that the jumper I have to remove (R6036) will not move at all, it just will not come out.
Anyone got any ideas of what I could do to get it out.
Thanks in advance
Yaesu FT-100d mod problem
- rematzz
- Regular
- Posts: 44
- Joined: 28 Sep 2012, 19:43
- Location: West Yorkshire, Pontefract
Yaesu FT-100d mod problem
73's
26TM607, 26CT886, M6***
PMR and ham radio
26TM607, 26CT886, M6***
PMR and ham radio
- ch25
- Top Poster
- Posts: 1680
- Joined: 03 Dec 2016, 11:07
- Call Sign: Lemmy
- Location: Poland
Re: Yaesu FT-100d mod problem
Heat it with soldering iron xD
WE ARE MOTÖRHEAD, AND WE PLAY ROCK N' ROLL
You can't have too many antennas...
You can't have too many antennas...
- rematzz
- Regular
- Posts: 44
- Joined: 28 Sep 2012, 19:43
- Location: West Yorkshire, Pontefract
Re: Yaesu FT-100d mod problem
Lol should have saw that coming haha
I've already tried it
I've already tried it
73's
26TM607, 26CT886, M6***
PMR and ham radio
26TM607, 26CT886, M6***
PMR and ham radio
- ch25
- Top Poster
- Posts: 1680
- Joined: 03 Dec 2016, 11:07
- Call Sign: Lemmy
- Location: Poland
Re: Yaesu FT-100d mod problem
It might be glued to the board, but temperature should soften the glue.
Does the solder melt? I usually had no problems with different smd job I've done. Keep in mind, that lead-free solder needs higher temperature. Also without hotair you must warm that element both sides at the same time.
According to that photo no glue underneath.
Chris
Does the solder melt? I usually had no problems with different smd job I've done. Keep in mind, that lead-free solder needs higher temperature. Also without hotair you must warm that element both sides at the same time.
According to that photo no glue underneath.
Chris
WE ARE MOTÖRHEAD, AND WE PLAY ROCK N' ROLL
You can't have too many antennas...
You can't have too many antennas...
- rematzz
- Regular
- Posts: 44
- Joined: 28 Sep 2012, 19:43
- Location: West Yorkshire, Pontefract
Re: Yaesu FT-100d mod problem
Thanks for that, am going to give it a go within the next hour, I'll let you know when I have finished ruining my radio haha
73's
26TM607, 26CT886, M6***
PMR and ham radio
26TM607, 26CT886, M6***
PMR and ham radio
- rematzz
- Regular
- Posts: 44
- Joined: 28 Sep 2012, 19:43
- Location: West Yorkshire, Pontefract
Re: Yaesu FT-100d mod problem
Done
You do not have the required permissions to view the files attached to this post.
73's
26TM607, 26CT886, M6***
PMR and ham radio
26TM607, 26CT886, M6***
PMR and ham radio
- ch25
- Top Poster
- Posts: 1680
- Joined: 03 Dec 2016, 11:07
- Call Sign: Lemmy
- Location: Poland
Re: Yaesu FT-100d mod problem
Good work, clean leftovers with alcohol and earpick.
Chris.
Chris.
WE ARE MOTÖRHEAD, AND WE PLAY ROCK N' ROLL
You can't have too many antennas...
You can't have too many antennas...