Hi all.
I am wondering if anyone can tell me if the K3NG Rotator Controller supports the use of servos as motors? Servos are cheaper, have more torque, are a lot smaller than any equivalent stepper motor and are a lot lighter.
I am planing on using 2 of these servos for my homebrew Azimuth and Elevation rotatator
eBay LINK
I cant seem to find any information on the actual supported motors for the K3NG Rotator Controller, the only info I could find is on the bellow link and very limited in details.
LINK
I am asuming that because the K3NG Rotator Controller supports PWM and a servo works via PWM that it would be OK.
Could anyone please shed some light on this for me and let me know if it works with servo motors or not.
Thanks de 2E0LIG
K3NG Rotator Controller
- nay27uk
- Radio Addict
- Posts: 640
- Joined: 20 Nov 2009, 15:02
- Location: Leicester UK
K3NG Rotator Controller
M6LIG / 2E0LIG / 26TM1995
Baofeng UV5R+
Boafeng RD-5R
YAESU FT-857D - Watson W50 - HF-SE-360
Malahit SDR - Ground Loop
Panasonic DR28-LBE
Baofeng UV5R+
Boafeng RD-5R
YAESU FT-857D - Watson W50 - HF-SE-360
Malahit SDR - Ground Loop
Panasonic DR28-LBE