The package consists of an instruction page and a firmware upgrade that makes it NXDN ready, the pay for unlock key is optional..
HOW TO ACTIVATE THE NXDN OPTION ON YOUR UBCD3600XLT
Release Notes:
1. Support NXDN4800 and NXDN9600 Trunked Systems (NEXEDGE System)
2. Support IDAS Trunked Systems
3. Support Conventional NXDN as NXDN One Frequency
4. Support NXDN Over The Air Alias
5. Support NXDN Direct Frequency Assignment version
These are the steps to take after the payment has been made:
1) The fee to activate NXDN on your UBCD3600XLT is Euro 55 including sales tax.
Payment can be made by using PayPal, our account
[email protected]
2) To activate the NXDN option it is necessary to load the firmware version 1.23.01 for
UBCD3600XLT
Please follow the instructions below:
Procedure Update Firmware:
2a. Unzip attached file to PC
2b. Connect UBCD3600XLT to PC via USB
2c. Power on UBCD3600XLT
2d. Press "E" key as selecting Mass Storage
2e. Copy UBCD3600XLT_V1_23_01.bin to Removable Disk:\BCDx36HP\firmware
2f. Reboot UBCD3600XLT
2g. Wait updating firmware...
2h. Check firmware version 1.23.01 (Menu/Settings/See Scanner Information/Firmware
Version)
ACTIVATION OF NXDN
3a. Send e-mail to Avera-Distributing, use
[email protected]
E-Mail should have the following information:
Serial number of the UBCD3600XLT
16-digit alphanumeric number beginning with SNXXXXXXXXXXXXXX (Menu/Settings/See Scanner Information/Firmware Version)
(Note: Use the serial number in the display! On box or radio cover is not complete !)
Checksum after installing the new firmware
3-digit alphanumeric number beginning with SUM=XXX (Menu/Settings/See Scanner Information/Firmware Version)
If in doubt send a photo from the display data
3b. Avera-Distributing will check with Uniden Japan to create an activation key for your scanner.
3c. You will receive the activation key by e-mail
3d. Register the received activation key in your scanner. (Menu/Settings/Upgrade/Upgrade NXDN)
Now your scanner is ready for NXDN operation ! V1.23.01 / 20 June 2018