Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
General scanning discussion forum. Talk about anything to do with scanners, equipment, VHF/UHF reception and the art of catching those illusive signals!
3 posts • Page 1 of 1
- Super Member
- Posts: 363
- Joined: 03 Dec 2016, 11:07
- Call Sign: n0call
- Location: Poland
Did you tried google search? http://www.coastalradio.org.uk/freqlist ... ebases.pdf
You can't have too many antennas...
- Radio Addict
- Posts: 688
- Joined: 10 Jun 2007, 22:41
- Call Sign: G4RMT
- Location: North East Suffolk
Marine spilts into two sections really - Ch 0 is the lowest at 156.0MHz, used only by the coastguard - ordinary marine radios very rarely include this channel - so it's kind of 'private'. The ports take up another area, and then you'll find a few chat channels so although marine goes up quite high, I very rarely monitor anything over 156.9. Lots of channels are split frequencies from when people used land stations to do phone patch - but as cell coverage os often better than marine, these are nowhere near the capacity they used to be. A few business channels are about, but it depends where you are as to channel occupancy. Searching works a bit better than hairband because transmissions are a little longer - but best way is to look up frequencies in your area on line and then aim for those. Channel spacing is 25KHz. Be aware the channel numbering is a hang on from the days when spacing was 50KHz, so the numbers go up, then back down to the bottom and up again, which confuses new people.
Who is online
Users browsing this forum: No registered users and 6 guests