Sdr# and sdr+ settings

[stanogs68]

Can someone hlp me with the best settings to listen for dmr radio on sdr from the 440 Marc as I'm having trouble turning the powerful signals into voice instead of background humming ,the sdr+ is set to default ,I have the rf three quarters up ,and I have it on wfm is there any were there's a list with settings that people have found too work best ,I'm on Windows 7 , any help would be welcome ,thanks

[Admiral]

My suggestion on another post to put it on WFM was a quick test to see if his bandwidth needed increasing on NFM, you should be on NFM to receive DMR normally.

[stanogs68]

Shall I switch it back admiral it did seem better wfm so maybe the bandwith
Does need changing I could do with a run down of the settings , it seems to not decode the signals though its on default the sDr + id that right with auto detect ?

[stanogs68]

can someone help if these settings are wrong or right
dsd+ input and ouput input ch 1 auto ,output ch 2 auto dsd 0
audio recorder nul create file mp3=15 frame info decoder auto
unvoiced speech quality 3 row off pot auto scaling 64 damping10 viewport20



then sdr #
shift not ticked bandwidth 9592 order 590
snap to grid ticked
correc tiq ticked


audio
audio gain or filter gain not ticked ?


noise reduction
hifi

noise blanker
no tick 49 %
pulse width 60.2o

recording
sample format not ticked base band ticked 68 pcm


zoom
nothing ticked


dsd interface
all groups

windows direct sound
cable input ,vb cable

dsd input output
input audio 1 ch auto output ch 2 auto
dsd 0


audio recorder


nul
create file mp3 =19
frame info 2

decoder

auto unvoiced
speech qual 3
row off auto
pot auto
scaling 64
damping 10
viewpoint 20
on on windows 7 can any one help if these settings are not right ps im back on nfm cheers everyone stan

[stanogs68]

Can no one give me any idea wetter these settings are wanted help wanted ,pleses
Cheers atanley

[stanogs68]

It's looks like am on my own on this one no hep I don't know howvcfl


Looks like I'm on my on gutted I'm sure if h settings were better it would be a lot better if now one I'm stuck
Come d
Sick of trying different numbers but no joy

M
Bb

[owza]

I have had success using HDSDR, and the free version of this virtual audio cable (vb-audio.pagesperso-orange.fr/Cable/)

I just dragged the bandwidth to cover the visible band, it looked ~NFM in width.
I set the output of HDSDR to the virtual audio cable. The input of DSD+ to be the cable and the
output of DSD+ to my speakers. I adjusted HDSDR volume to ~75% and listened in.

Cheers,

Owen

[stanogs68]

Thanks owen