Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
now individually re-import the original channels CSV and the re-organised contacts CSV into the CPS and look at your channel data afterwards
(not the contacts list)
find the channel that had TG1 as the digital contact and you NOW have a contact of private call - RADIO-1 STEVE
oops ! you will never hear TG1 on that channel
This is because the digital contact name is not stored against a channel in the channel data CSV export file - its stored against its original position in the DIGITAL CONTACT "NO". column
And that's a coder's cluster**** !!
regards
BB
Last edited by bigbloke on 11 Jul 2017, 13:38, edited 2 times in total.
Aaaaaaagh, please tell me the DTMF mic is an option rather than standard, I'm sure it is great for pros, but I have no use for one and really don't like them, I'm forever sending loud tones to people on air because of my sausage fingers and arthritis.
Winner of the 2017 IBTL 'Summer Sizzler' competition
I hadnt seen that fan on the back before ! wont go where I was hoping to fit it
(VWT5 roof cubby hole) without a mod...have to be on the fusebox cover
the only feature missing - and believe me I pestered TYT - is the ability to change your DMR ID from the front panel
or programme it on a per channel basis
bigbloke wrote:
the only feature missing - and believe me I pestered TYT - is the ability to change your DMR ID from the front panel
or programme it on a per channel basis
hopefully Travis / Ty will hack and add this
regards
BB
That would be a cool feature, that's why I have two UHF 380's, one for ham stuff and one for 'other' stuff. It's too much of a pain to swap the ID over every time, and sooner or later I would forget and it could be embarrassing to say the least.
Winner of the 2017 IBTL 'Summer Sizzler' competition
Admiral wrote:That would be a cool feature, that's why I have two UHF 380's, one for ham stuff and one for 'other' stuff. It's too much of a pain to swap the ID over every time, and sooner or later I would forget and it could be embarrassing to say the least.
you do realise that both the travis goodspeed alternative firmware AND the Ty Weaver firmware (a derivative of Travis' work) for the MD380 both
support this natively ? They add a menu item to do it .
regards
BB
Last edited by bigbloke on 12 Jul 2017, 11:08, edited 1 time in total.
bigbloke wrote:theres a guy on youtube just reviewed one of the samples ( hamradio 2.0 ) and his test confirm that the
low power settings run just under 5W
Love this guy's approach to unboxing videos "It's out of the box - shut up!"