Page 2 of 2
Re: The new Baofeng UV-8 cannot programme it!!
Posted: 20 Aug 2013, 07:29
by Celebritypaul
Celebritypaul wrote:Yep!!
Another one , except this one can't be programmed from the set :-/
So...
I've Got the correct software , Im using the cable which works all my other kenwood type fitting chinese radios with no issues , but will not read the radio . The usual "Check connections@ message is all.
No info on how to actually programme it in the manual , nobody on Internet talks if them .
So...
I'm stuffed at the moment , with a nice door stopper!
With no offer of compensation other than to return it at my cost to China , the loss will be mine.
The Seller :
"
ESHOW.DEALS"
I would advise all to stay clear of this seller.
Re: The new Baofeng UV-8 cannot programme it!!
Posted: 20 Aug 2013, 19:13
by wasserbueffel
Celebritypaul wrote:
OK...
What is (interface with FTDI chipset)?
Special Lead?
Paul
This is also a USB-serial adapter ..
Only other chipsets.
So you do not have the driver problems as with the Prolific chipset.
So I program all my devices!
http://www.amazon.de/Digitus-DA-70156-U ... m_cmu_pg_t
Walter
Re: The new Baofeng UV-8 cannot programme it!!
Posted: 23 Aug 2013, 21:49
by Celebritypaul
wasserbueffel wrote:Celebritypaul wrote:
OK...
What is (interface with FTDI chipset)?
Special Lead?
Paul
This is also a USB-serial adapter ..
Only other chipsets.
So you do not have the driver problems as with the Prolific chipset.
So I program all my devices!
http://www.amazon.de/Digitus-DA-70156-U ... m_cmu_pg_t
Walter
I might try my USB to serial adaptor lead which I have and see what this dose?
Also Ive just taken delivery of a clone lead which Im going to try when I receive my keypad version of this radio through the post . I will programme this by hand and then attempt to clone it with the unprogramnable Baofeng .
Re: The new Baofeng UV-8 cannot programme it!!
Posted: 26 Aug 2013, 17:22
by Celebritypaul
Celebritypaul wrote:wasserbueffel wrote:Celebritypaul wrote:
OK...
What is (interface with FTDI chipset)?
Special Lead?
Paul
This is also a USB-serial adapter ..
Only other chipsets.
So you do not have the driver problems as with the Prolific chipset.
So I program all my devices!
http://www.amazon.de/Digitus-DA-70156-U ... m_cmu_pg_t
Walter
I might try my USB to serial adaptor lead which I have and see what this dose?
Also Ive just taken delivery of a clone lead which Im going to try when I receive my keypad version of this radio through the post . I will programme this by hand and then attempt to clone it with the unprogramnable Baofeng .
OK , just to let you all know that (Serial lead didn't work neither) , so that's
All the program's and drivers and leads tried .
Re: The new Baofeng UV-8 cannot programme it!!
Posted: 22 Dec 2016, 19:08
by zlatkobb
wasserbueffel wrote:Without software, a dual-band device is pointless!
In my UV82 I found no software from the manufacturer.
On the RU servers I have the software found.The is strange!
On the device is at the top and bottom only UV Dual Band 400-520 MHz.
Dual band for UHF frequencies??
dali ste uspeli isprogramirati ovu radio stanicu
Re: The new Baofeng UV-8 cannot programme it!!
Posted: 23 Dec 2016, 08:58
by MrWeetabix
zlatkobb wrote:wasserbueffel wrote:Without software, a dual-band device is pointless!
In my UV82 I found no software from the manufacturer.
On the RU servers I have the software found.The is strange!
On the device is at the top and bottom only UV Dual Band 400-520 MHz.
Dual band for UHF frequencies??
dali ste uspeli isprogramirati ovu radio stanicu
On je programiran svoj radio, da. To je pomoću softvera je founf na RU poslužitelju.
Molimo post u engleskom od sada. Hvala ti.(Please post in English, thanks)