gm950 programming

Here you can discuss Datamodes for all bands (PSK31, FT8, JS8Call, etc), Software Defined Radio topics & General Radio Software or apps
dieselman
Regular
Regular
Posts: 73
Joined: 14 May 2012, 00:03
Location: crossmaglen n.ireland

gm950 programming

Post by dieselman »

would any body know the right software for the gm950 or were i might get it ,i bought one on ebay and want to programme it ,also would the same software work on the gm350 as my mate sold me 2 of these cheap that he had when he had his taxi firm..i bought the cable on ebay so i just need the software thanks alot ..brian :)
scanking
Super Member
Super Member
Posts: 274
Joined: 19 Dec 2011, 13:48
Location: Lincoln

Re: gm950 programming

Post by scanking »

http://www.cqham.ru/ftp/gm950.zip

http://www.cqham.ru/ftp/wgm350.zip

Try that.

I don't have the radio or software myself so?
Ham: Yaesu FT-100D, Yaesu FC-20.
CB: KPO DX 5000(V4), TTI-TCB-880.
Scanner: Uniden Bearcat UBC 3500XLT, Alinco DJ-X3, Yupiteru MVT-7100.
PMR 446: Binatone Terrain 550.
26-TM-2407
dieselman
Regular
Regular
Posts: 73
Joined: 14 May 2012, 00:03
Location: crossmaglen n.ireland

Re: gm950 programming

Post by dieselman »

thanks very much for ur help bro ...brian :)
scanking
Super Member
Super Member
Posts: 274
Joined: 19 Dec 2011, 13:48
Location: Lincoln

Re: gm950 programming

Post by scanking »

No problem.

Just for others benefit are they the correct software for the radio's?
Ham: Yaesu FT-100D, Yaesu FC-20.
CB: KPO DX 5000(V4), TTI-TCB-880.
Scanner: Uniden Bearcat UBC 3500XLT, Alinco DJ-X3, Yupiteru MVT-7100.
PMR 446: Binatone Terrain 550.
26-TM-2407
dieselman
Regular
Regular
Posts: 73
Joined: 14 May 2012, 00:03
Location: crossmaglen n.ireland

Re: gm950 programming

Post by dieselman »

i think ur right scanking ,i had this link last nite i opened the zip and it opened up in 2 disks ,disk one will open but disk 2 will not they are shr files ,when i hit set up on disk one you think the soft ware is been installed but it just gets as far as saying gm950 rss software ,then it shuts off ,im new to this stuff so i hope im makin sense ,i have windows xp by the way dont know if that makes a difference,as for the gm 350 i dont know if i could programme them ,i have no problems with the gm340 ...thanks again for ur help... :? brian
scanking
Super Member
Super Member
Posts: 274
Joined: 19 Dec 2011, 13:48
Location: Lincoln

Re: gm950 programming

Post by scanking »

I tried to install the GM-950 and all it did was place a config file in a destination of my choosing.
Looking at the readme it suggests it's an update.
So i think this updates the already installed software to latest version?

I'll have a search around see if i can find it elsewhere.

Win 98 by the looks of it.

I can't get it to work on win7.(Even with compatability mode)
Ham: Yaesu FT-100D, Yaesu FC-20.
CB: KPO DX 5000(V4), TTI-TCB-880.
Scanner: Uniden Bearcat UBC 3500XLT, Alinco DJ-X3, Yupiteru MVT-7100.
PMR 446: Binatone Terrain 550.
26-TM-2407
dieselman
Regular
Regular
Posts: 73
Joined: 14 May 2012, 00:03
Location: crossmaglen n.ireland

Re: gm950 programming

Post by dieselman »

thanks bro i have a new dell lap top coming today or monday with windows 7 on it from currys my pc is old as hell,as i said im new to this but im learning alot of this site ,theres some gud stuff on here ,well thanks again all help much appreciated.. :)
troffasky
Super Member
Super Member
Posts: 341
Joined: 18 Jul 2010, 14:58

Re: gm950 programming

Post by troffasky »

dieselman wrote:thanks bro i have a new dell lap top coming today or monday with windows 7 on it from currys my pc is old as hell
I think you've misunderstood what he said. Windows 7 is too new [by about 10 years, apparently] to run this software on.
dieselman
Regular
Regular
Posts: 73
Joined: 14 May 2012, 00:03
Location: crossmaglen n.ireland

Re: gm950 programming

Post by dieselman »

yea i get that bro ,my mate said i should run it in windows 98 ,will i have to run the gm350 software in this too ???i would like to be able to programme gm350 as alot of my friends still use them in there cabs round here ..thanks brian
dieselman
Regular
Regular
Posts: 73
Joined: 14 May 2012, 00:03
Location: crossmaglen n.ireland

Re: gm950 programming

Post by dieselman »

did any one ever find another copy of the gm950 cps for model #m08rhh4an4an i still never got the radio programmed i even bought an old laptop with windows 95 on ebay but i think its the software that is corrupt ..i know it needs windows 95 to run but it seems to be very hard to locate this actual cps ..if any body has it i would be really greatful thanks ...brian :(
User avatar
Yeti
Veteran
Veteran
Posts: 4785
Joined: 14 Nov 2007, 00:31

Re: gm950 programming

Post by Yeti »

I had a GM950 I picked up cheap a while back - seemed to be very hard to program. I'm sure (at the time) there wasn't a RIBless cable available either (and no cheap copy RIBs) - I just sold it off on eBay.
Will the next movie in the series be The Fast and The Funeral?
dieselman
Regular
Regular
Posts: 73
Joined: 14 May 2012, 00:03
Location: crossmaglen n.ireland

Re: gm950 programming

Post by dieselman »

yea it driving me f****n mental i tried everything with this software to open windows 98 xp and 95 i think this cps ro2.00.00 only runs on 95 ..i even bought a old toshiba 300cds laptop wit windows 95 and it still wont open so its got to be the software the one i have seems to be missing a file or something ..im not given up yet if i do get to read this radio ill never buy a gm950 again ...all the copys i find on the net seem to be the same one ..thanks for the info did you get the gp340 sorted?? i have r03.11.16 if your stuck let me know ..brian :?
User avatar
Yeti
Veteran
Veteran
Posts: 4785
Joined: 14 Nov 2007, 00:31

Re: gm950 programming

Post by Yeti »

dieselman wrote:yea it driving me f****n mental i tried everything with this software to open windows 98 xp and 95 i think this cps ro2.00.00 only runs on 95 ..i even bought a old toshiba 300cds laptop wit windows 95 and it still wont open so its got to be the software the one i have seems to be missing a file or something ..im not given up yet if i do get to read this radio ill never buy a gm950 again ...all the copys i find on the net seem to be the same one ..thanks for the info did you get the gp340 sorted?? i have r03.11.16 if your stuck let me know ..brian :?
DOS. It'll probably be DOS. Still no joy with the GP340 yet.
Will the next movie in the series be The Fast and The Funeral?
dieselman
Regular
Regular
Posts: 73
Joined: 14 May 2012, 00:03
Location: crossmaglen n.ireland

Re: gm950 programming

Post by dieselman »

no i tried dos it keeps telling me its a windows based programme which it is ,i guess im missing something or else that software is cursed..lol.. 8)
dieselman
Regular
Regular
Posts: 73
Joined: 14 May 2012, 00:03
Location: crossmaglen n.ireland

Re: gm950 programming

Post by dieselman »

got a working copy of cps r02.00.00 and it works great on xp its from oct 1997 ..but im faced wih a new problem when i go to read the radio it keeps telling me no response from radio i tried a gud few times and it started to read but stopped im using the mic jack and 9 pin lead wit 9volt battery ..i checked all connections and radio powered on ..maybe i should get a lead that fits the accessory 25 pin plug on the back of the gm950 ..i have a few leads and none seem to work..what you guys think...thanks brian :)
Post Reply