Page 2 of 3

Re: CRT SS6900 dat files?

Posted: 17 May 2012, 21:48
by chemtrail
Admiral wrote:I put a v4 file on this thread if it's any use.

http://www.transmission1.co.uk/forum/vi ... 29&t=28198
No good has to be V3.1 and for the CRT 6900 as any other V3.1 dat is no good.
It loads into the CRT software but when you come to programming the radio it just say wrong version arrrgggg {bnghd}

O well nearly done my own now :D

Re: CRT SS6900 dat files?

Posted: 18 May 2012, 06:28
by Admiral
Let's hope it's a CRT thing and not your radio that's dud.

Re: CRT SS6900 dat files?

Posted: 18 May 2012, 11:04
by UGLY_BOB
The 'Superstar' CRT versions have a different software (Superstar requested it from Qixiang)... so it is normal to find the .dat files of others don't load. There's a wealth of 5555 info on the Charlie Tango forum BTW.
Ugs

Re: CRT SS6900 dat files?

Posted: 18 May 2012, 18:08
by Admiral
Is it the CRT that defaults to 10m with a factory reset instead of 11m/10m?

Re: CRT SS6900 dat files?

Posted: 18 May 2012, 20:00
by chemtrail
ok could'nt find any on the net ended up writing my own band plan DAT files here's 2 i posted on the anytoneat5555 facebook page for download.

http://www.facebook.com/groups/128378550572927/files/

there are too dat files one i made is 6x40 channels from s low to s high and uk fm
and the other is 6x60 channels from ss low to sss high and uk 40 fm.

These will only work on the CRT 6900 V 3.1

hope this helps others

if you cannot download them from here pm me your email and i will email them to you.

cheers

Re: CRT SS6900 dat files?

Posted: 18 May 2012, 20:18
by Admiral
I'm sure they'll be a great help on the 5555 site.

Re: CRT SS6900 dat files?

Posted: 29 Apr 2017, 12:47
by martin
im try to find the download for crt ss 6900,can any1 help me plz... :crazy: :crazy: :crazy: {bnghd} {bnghd} {bnghd}

Re: CRT SS6900 dat files?

Posted: 11 Oct 2017, 13:57
by HighwayPatrol
I have painfully written the data files for the Superstar 6900N for Bands A to F with the following frequencies

BAND A: 26.065 to 26.505
BAND B: 26.515 to 26.955
BAND C: 26.965 to 27.405
BAND D: 27.415 to 27.855
BAND E: 27.865 to 28.305
BAND F: 27.601 to 27.991

When i was doing them i was checking the frequency charts and found that the frequencies didnt match the channel numbers on some, so i have written them in the correct order. I.E one channel would say 555 and the next higher channel would say 135. I couldnt understand this. If anyone understands what i mean then u will know, lol. I have saved the 6900N data fikes to hard drive as i will be needing it to re program my radio.

Re: CRT SS6900 dat files?

Posted: 11 Oct 2017, 14:00
by HighwayPatrol
will the V6 work for yours ?

Re: CRT SS6900 dat files?

Posted: 18 Oct 2017, 09:10
by fertred
HighwayPatrol wrote:I have painfully written the data files for the Superstar 6900N for Bands A to F with the following frequencies

BAND A: 26.065 to 26.505
BAND B: 26.515 to 26.955
BAND C: 26.965 to 27.405
BAND D: 27.415 to 27.855
BAND E: 27.865 to 28.305
BAND F: 27.601 to 27.991

When i was doing them i was checking the frequency charts and found that the frequencies didnt match the channel numbers on some, so i have written them in the correct order. I.E one channel would say 555 and the next higher channel would say 135. I couldnt understand this. If anyone understands what i mean then u will know, lol. I have saved the 6900N data fikes to hard drive as i will be needing it to re program my radio.
Looks good, don't suppose you'd care to share the DAT file for that please?

Re: CRT SS6900 dat files?

Posted: 10 Oct 2019, 10:41
by Badgeruk1980
Help need file please

Re: CRT SS6900 dat files?

Posted: 18 Mar 2020, 14:44
by foresy44
chemtrail wrote: 18 May 2012, 20:00 ok could'nt find any on the net ended up writing my own band plan DAT files here's 2 i posted on the anytoneat5555 facebook page for download.

http://www.facebook.com/groups/128378550572927/files/

there are too dat files one i made is 6x40 channels from s low to s high and uk fm
and the other is 6x60 channels from ss low to sss high and uk 40 fm.

These will only work on the CRT 6900 V 3.1

hope this helps others

if you cannot download them from here pm me your email and i will email them to you.

cheers
Hi can you send a copy of the dat file to [email protected] cheers

Re: CRT SS6900 dat files?

Posted: 09 Apr 2020, 19:45
by Rixx
You know if you turn off the Radio hold the Func button and the S/RF button down together and turn on the radio (Awkward but dooable) you can choose the band (1 or 2) with the channel change knob then press and hold the Func key till you see "rEnd" on the display then turn off your radio you will see the bands have changed to the default dat file data.

Re: CRT SS6900 dat files?

Posted: 27 May 2020, 20:24
by Crackle
SS-6900n v6 dat files have fun,

Re: CRT SS6900 dat files?

Posted: 30 Jul 2020, 15:02
by zonerc
Hi anyone know why when I use a data file on a CRT 6900n V6 Including the one on this page.

the uk 40 looks right be for I write it to the radio but once a write it all the channels say 20 at the end of the frequency instead of 25?

thanks in advance