ISO: VHF High Band & UHF Freqs for Dublin

Scanning radio frequencies for the Republic of Ireland
Post Reply
User avatar
timb
Super Member
Super Member
Posts: 115
Joined: 01 Apr 2009, 15:42

ISO: VHF High Band & UHF Freqs for Dublin

Post by timb »

Hi All,
i used to monitor the Dublin Ambulances and other Traffic 77-86mhz
but its now totally destroyed by a local noise source so i'm looking for targets in the 146-170mhz & 420-470mhz range.
any ideas?

166mhz is quite clear here now the UK ambulances are switching over to tetra
Irish TV is quite strong today so it would be good to have to targets

Tim Bucknall
Congleton, Cheshire
best contact on PMR (0.5watts only): 21.5 miles (Congleton to Junction of A54/A556 near Kelsall 06/03/2011)
Best Contact on LPD (10mW only) 14.2 Miles (Congleton to The Roaches 18/04/2011)
Gear: Intek MT-5050 Unmodified
JOHN,YORK
Radio Addict
Radio Addict
Posts: 557
Joined: 04 May 2010, 23:30

Re: ISO: VHF High Band & UHF Freqs for Dublin

Post by JOHN,YORK »

Timb.
Only a suggestion,but have you tried this site before.

http://www.frequencydb.com/forum/index.php

Regards,John.
User avatar
timb
Super Member
Super Member
Posts: 115
Joined: 01 Apr 2009, 15:42

Re: ISO: VHF High Band & UHF Freqs for Dublin

Post by timb »

Thanks John,
I can't figure out taht site, i seem to have signed up for the message board but don't have access to the database, i'm probably doing something wrong
best contact on PMR (0.5watts only): 21.5 miles (Congleton to Junction of A54/A556 near Kelsall 06/03/2011)
Best Contact on LPD (10mW only) 14.2 Miles (Congleton to The Roaches 18/04/2011)
Gear: Intek MT-5050 Unmodified
JOHN,YORK
Radio Addict
Radio Addict
Posts: 557
Joined: 04 May 2010, 23:30

Re: ISO: VHF High Band & UHF Freqs for Dublin

Post by JOHN,YORK »

TIMB,
I am also having problems with it,it will not accept my password.Suggest you just look through the forums and pick up what is useful for you.
When I have sorted out what is going on,I will let you know.

Regards,John.
Post Reply